The valve type ZDR is a direct operated pressure reducing valve in sandwich plate design with pressure limitation of the secondary circuit. It is used to reduce the system pressure. The pressure reducing valve basically comprises of a hous-ing (1), a control spool (2), a compression spring (3), adjust-ment type (4) and an optional check valve

General Type DRE6X proportional pressure reducing valves are pilot operated, with a 3-way main stage. The pilot valve (pressure relief valve pilot stage) is supplied internally with a controlled flow of pilot oil via P. The valves are actuated by a proportional solenoid acting against a spring. The solenoid armature is cushioned to aid stability.

RE 64666/02.10 MHDRE 04 Hydraulics Bosch Rexroth AG 3/8 Function, section Basic principle The valve controls the pressure in the main port ① propor-tionally to the current at the solenoid. The proportional solenoid (1) converts the electric current into mechanical

Pressure reducing valve ZDR 5/10 RE 26570, edition: 2018-03, Bosch Rexroth AG general Weight kg ca. 1.2 Installation position any Ambient temperature range C –30 +80 (NBR

Pressure reducing valve, direct operated Type DR 6 DP Size 6 Component series 5X Maximum operating pressure 315 bar [4568 psi] Maximum flow 60 l/min [15.9 US gpm] RE 26564/05.11 Replaces: 02.03 Table of contents Features – For subplate mounting

They are used to reduce a system pressure. The secondary pressure is adjusted by means of adjustment element (4). In the initial position, the valves are open. Hydraulic fluid can flow from service port 2 to 1 without any restrictions.

RE 25771, edition: 2016-03, Bosch Rexroth AG. Pressure relief valve, direct operated. Features. ▷ Sandwich plate valve. ▷ Porting pattern according to ISO 

RE 26874, edition: 2016-10, Bosch Rexroth AG. Pressure reducing valve, pilot-operated. Features. ▷ Sandwich plate valve. ▷ Porting pattern according to 

A pressure reducing valve ensures that a reduced pressure is maintained in defined areas of a hydraulic system. It is triggered if the pressure increases in the area of the valve. It blocks the flow to the controlled area until the pressure lies below the set value again. The valve basically consists of a valve housing, a pressure spring and a

Sandwich plate valve · Proportional-Pressure reducing valve · Nominal Size 10 · pilot operated · Pressure reduction in channel P1 

4/10 ZDR Pressure reducing valve Bosch Rexroth AG, RE 26861, edition: 2013-02 Pressure valves of type ZDR 10 V are pilot operated pres-sure reducing valves in sandwich plate design. They are used for reducing a system pressure. The pressure valves basically consist of pilot control valve (1) and housing (2). The secondary pressure is set via

Check valve, optional (only for subplate mounting valves). Pressure reducing valve, pilot operated. Nominal sizes 10 to 32. Series 5X. Maximum operating 

Bosch Rexroth AG Hydraulics. DRE6X RE 29177/07.05. Ordering data. Proportional 3-way pressure reducing valve NG6, pilot operated.

Bosch Rexroth AG, RE 58032/2022-02-02 6 FTDRE 2 K | Proportional pressure reducing valve Characteristic curves Characteristic curves p-I characteristic curves with tolerance band

RE 26 570/02.03 6/8 ZDR 6 D Bosch Rexroth AG Industrial Hydraulics D-97813 Lohr am Main Zum Eisengießer 1 • D-97816 Lohr am Main Telefon 0 93 52 / 18-0 Telefax 0 93 52 / 18-23 58 •

Pressure Reducing Valves. Featuring leading interfacing technology and over 8 types to choose from, Bosch Rexroth’s range is comprehensive and exclusive to Hytec. Whether you’re looking for a valve with electronic position feedback and on-board electronics, or operation at up to 315 bar, we’ll gladly assist you with specification advice.

RE 18166/2019-12-13, Bosch Rexroth AG Contents RE 18166/2019-12-13 Replaces: 01. 3-way proportional pressure reducing valve, pilot-operated, rising characteristic curve Type KTVS.1A Features Screw-in cartridge valve Mounting cavity R/UNF10-03-0

RE 64659/07. , Bosch Rexroth AG Proportional pressure reducing valve | DRE05SK 7 Permissible working range ∆p-q V-flow characteristic curve Flow qV [l/min] Pressure differential Δp AT [bar] -30 -20 -10 0 10 20 30 0 5 10 7.5 2.5 15 17.5 12.5 20 A ˜ T P ˜ A

conditions into account a back pressure valve is to be fitted (back pressure approx. 2 bar). Type 3DREPE 6.. Type 3DREP 6.. The 3-way pressure reducing valve type 3DREP 6.. is directly operated by proportional solenoids. They convert an electrical input signal

2003 by Bosch Rexroth AG, Industrial Hydraulics, D-97813 Lohr am Main. All rights reserved. No part of this document may be reproduced or stored, processed, 

They basically consist of main valve (1) with main spool insert (3) and pilot control valve (2) with pressure adjustment element. At rest, the valves are open, this means that fl uid can freely pass from port B, to port A via the main spool insert (3). Pressure present in port A acts on the under side of the main spool.

Bosch Rexroth AG Industrial Hydraulics. Foreword. ▫ Pressure reducing valves. – Size 6 direct operated (0 811 148 225 to 0 811 148 248) (DR 6 DPZ2-1X) 

Standard types and standard units are contained in the. EPS (standard price list). Page 3. Hydraulics Bosch Rexroth AG. RE 25761/05.11 ZDB; Z2DB. 3/ 

4/10 ZDR | Pressure reducing valve Bosch Rexroth AG, RE 26570, edition: 2018-03 Function, section The valve type ZDR is a direct operated pressure reducing valve in sandwich plate design with pressure limitation of the secondary circuit. It is used to reduce the system pressure. The pressure reducing valve basically comprises housing

The pressure reducing valves basically consist of the main valve (1) with main spool insert (3) and pilot control valve (2) with adjustment type. In the rest 

Pressure reducing valve | Z3DR 3/10 RE 26874, edition: 2016-10, Bosch Rexroth AG Symbols (① = component side, ② = plate side) Type Z3DR 10 VP Valves of type Z3DR are pilot-operated 3-way pressure reducing valves with pressure limitation of the actuator in sandwich plate design. They serve for reduction and control of the system pressure.